Steel Making 95% ZrO2 Tundish Nozzle Flow Control Refractory
Introduction
The composite nozzlew are manufactured without the use of cement jointing, using an insert and pressed outer body. This method of manufacture provides a reliable system with no risk of steel leakage between the insert and outer body.
Chemical Composition and Physical Propeties
| Model | Chemical Composition | Physical Properties |
| ZrO2 (%) | Al2O3 (%) | SiO2 (%) | MgO (%) | Bulk Density (g/cm3) | Apparent Porosity (%) |
| FMXC-LZN-002 | 95-96 | ---- | ---- | 2.7-2.9 | 5.40-5.45 | not more than 7%
|
Size Tolerance:
Middle Hole Diamter:+-0.2mm, other sizes: +-1mm.
Exported Countries
India, Pakistan, Iran, Thailand, Turkey, Peru, USA, etc.
Fangming NewM Main products:
Since setup, our company is devoted to the R&D, creation of the new type of composite nano-ceramic materials and products. Fangming NewM mainly produce:
1). ZrO2 Nozzle, slide plate, ZrO2 Ring, Insert, applied as flow control function in metallurgy at high-temp. State,
2). ZrO2 atomizing nozzle in the amorphous alloy powders,
3).Rare-Earth Oxide Composite SS ceramic thermal field in artificial crystal (Sapphire, laser gem, etc.) grower,
4).Pre-sintered ZrO2 parison, base plate for metal sputtering target,
5). High density ZrO2 ceramic lip brick in ultra thin electronic glass , sintering gasket in electronic device.
6). Device in hot compression equipment of 3D glass, etc.
The quality of products we are producing is the same, even better than the one produced by the other producers in the same industry from USA, European countries.
Fangming NewM Goal:
Large size, super special shaped super high temp. zirconia ceramics, we will offer the comprehensive and integrated super high temperature, strong crushing resistance, strong erosion resistance application condition solutions.
Product Tags:
|
|
Steel Making 95% ZrO2 Tundish Nozzle Flow Control Refractory Images
|
